Often the most difficult part of a DIY speaker project is the cabinet construction. Most people simply do not have the tools or training required to produce the sometimes quite complicated enclosures for truly high end speaker systems. Another major difficulty is finishing the cabinets. Veneer coatings and painted surfaces alike are difficult to realize without the proper equipment and spray booth environments. Wyatt Acoustics hopes to assist anyone who wants to have a really great speaker system at a reasonable cost by offering our shop services to the DIY enthusiast. Just email Frank with questions about any design you want to build. We also can provide drivers, crossover components, and just about anything you need for your speaker project....all at great prices....just ask! Have a look at some of our custom builds in the gallery further down on this page.

Wyatt Acoustics vending at Nearfest 2009 (below)

Our Custom Speaker Project Gallery

Next up on the workbench: We are prototyping some new PRS amplifier cabinets that should be awesome, building some more of the Wyatt Acoustics designed PRS Monitors in a Crotch Mahogany veneer, finishing up some P-Audio BM15 CX38 enclosures, and a very nice pair of the 5.6 cabinets for a pair of the Altec 604E drivers.

The Tony Gee designed Galactica project is finished at last! Read about this build here.

The Usher MTM project in Walnut Burl is completed. See the write up of these great sounding and affordable speakers here.

The Elsinore Project was built for a client in New Hampshire. Australian Joe Rasmussen has come up with a really wonderful speaker here.

This custom build was for an exceptionally nice gentleman from Washington state, Dan. He emailed inquiring about a pair of cabinets for some Tannoy drivers he had and after about two months these two beauties are what we ended up with (click the photo for an enlarged view). For more about the build click here.

This pair of CommonSense Audio 2.8 cabinets were custom veneered with a Mappa Burl for a client in Hong Kong. We will build any design from any material. Also shown are a pair of the 2.8 Ambience cabinets in Cherry. Just email Frank and we can discuss your specific requirements.

An open baffle design using the Audio Nirvana 8" driver. We can fabricate your open baffle using this design with your custom driver placement and baffle dimensions. Show us a plan and we will come up with a build for you!

The mass loaded tapered quarter wavelength tube using a Lowther DX2 was built from a high density particle board and sprayed white. We can build these for you under a licensing agreement in place with designer Martin King.